Homepage | Legal | Sitemap | Contact us | Chinese
 
Homepage
About us
Panels
Cox Applicators
Service&Support
Contact us
Single-comp Applicators
  Airflow I pneumatic
  Airflow II pneumatic
  Airflow 3 pneumatic
  Jetflow 3 pneumatic
  Easipower Plus Battery
  Electraflow Plus Battery
  Easiflow Manual
  Midiflow manual
  Powerflow Manual
  Ultraflow Manual
  Ultrapoin Manual
Dual-comp Applicators
  Pneumatic dual-comp
  Manual dual-comp
  Battery dual-comp
Clamp
  Soloclamp
   
 
Cox Applicatiors
Airflow I pneumatic applicator
A range of pneumatic applicators using Cox's heavy duty handles making this range ideal for the most rigorous applications indoors and out.

Airflow I CARTRIDGE
Pneumatic applicator for cartridges
2 sizes for 310ml and 400ml cartridges
1.45kN (145kgf) thrust at 6.8 bar operating pressure check thrust again
Direct acting piston seals directly onto cartridge plunger
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator
Heavy duty handle (suitable for outdoor use)

Airflow I SACHET
Pneumatic applicator for sachets
Dispenses 310ml, 400ml and 600ml sachets
1.45kN (145kgf) thrust at 6.8 bar operating pressure
Available in 3 standard barrel lengths (aluminium)
Tethered piston and plunger action
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator
Variety of plungers, nozzles and accessories available (Link to Accessories page)
Heavy duty handle (suitable for outdoor use)

Airflow I COMBI
Pneumatic applicator for cartridges and sachets
Dispenses 310ml, 400ml and 600ml sachets
Dispenses 310ml and 400ml cartridges
Also suitable for 150ml co-axial cartridges
1.45kN (145kgf) thrust at 6.8 bar operating pressure
Separate interchangeable front barrels in 3 standard sizes (aluminium)
Piston-driven rod action
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator.
Particularly suitable for use with aluminium cartridges.

Airflow I COMBI HP
Pneumatic applicator for cartridges and sachets
High pressure version of Airflow I Combi, for use with ultra high viscosity sealants
Dispenses 310ml, 400ml and 600ml sachets
Dispenses 310ml and 400ml cartridges
Also suitable for 150ml co-axial cartridges
2.2kN (220kgf) thrust at 6.8 bar operating pressure
Separate interchangeable front barrels in 3 standard sizes
Piston-driven rod action
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator
Particularly suitable for use with aluminium cartridges

Airflow I QUART
Pneumatic applicator for long (320 x 67mm) 946ml (US Quart) cartridges
145kgf (1.45kN) thrust at 6.8 bar operating pressure
Piston-driven rod action
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator

Airflow I 1000L
Pneumatic applicator for long (324 x 71mm) 1-litre cartridges
1.45kN (145kgf) thrust at operating pressure 6.8 bar
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator

Airflow I 1000S
Pneumatic applicator for short (240 x 91mm) 1 litre cartridges
1.2kN (120kgf) thrust at 6.8 bar operating pressure
Direct acting piston seals directly onto cartridge plunger
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator

Airflow I Bulk
Large volume pneumatic applicator for speciality use
Designed for low viscosity (pouring grade) bulk materials
3 standard capacities: 2, 3 and 4 litre
1.45kN (145kgf) thrust at 6.8 bar operating pressure
Tethered piston and plunger action
Quick exhaust valve minimizes ‘flow on’
Easily adjustable pressure regulator
Also suitable for use with sachets
Quick release aluminium end caps for easy loading.

 
© 2000-2016 Shenzhen Century M&E Co.,Ltd.All Rights Reserved.